on-line ups 20kva on-line pure sine wave ups isolate transformer ups 10kva to 80kva ups

on-line ups 20kva isolation transformer online ups double DSP online ups start directly online ups battery discharge pro

on-line ups 20kva

 

Main Features:High accuracy and reliability due to the double DSP control systemlow power consumption up to 94%cold start directly and smart operation for users.simple to install:capability to install the UPS into any distribution system (neutral not required on rectifier input)capability of regulating the output voltage (to offset voltage drops down long cable runs)built-in automatic and manual battery test feature, battery deep discharge protection and temperature compensating chargerback-feed protection: to avoid energy feeding back into the mains supply should a fault occurreliable, filtered, stabilized and regulated sine wave output (double conversion on-line technology )with filters for atmospheric disturbance suppression- high reliability, full microprocessor control with no-break static and manual bypasses,extremely high short-circuit current to ensure compatibility with the most difficult transformer applications (lighting, drives and industrial processes) and an isolation transformer on the inverter output- maximum reliability and power availability- high level diagnostics: event log with messages, status, measurements and alarms - available from the built-in LCD in several languages

 

MODEL		HT-      9115-10K	HT- 9115-20K	HT- 9115-30K	HT- 9115-40K	HT- 9115-60K	HT- 9115-80K
CAPACITY		10KVA/8KW	20KVA/16KW	30KVA/24KW	40KVA/32KW	60KVA/48KW	80KVA/64KW
INPUT
Voltage		380/400/415 Vac±20%,3 Phase +N
Input Frequency		50/60 Hz ±10%
Power Factor		>=0.95
MAX RFI		EN50091-2 Class A.
Input voltage protection		Electronic Input out of tolerant protection
OUTPUT
AC Voltage Regulation (Batt.Mode)		380/400/415 Vac ±1%,3 Phase +N
Voltage tolerant		(balanced load:+/- %1)(unbalanced:+/- %2)(full load:+/-%5)
Voltage regulation time		After full load: 25 ms
Frequency Range		50Hz (60Hz special product)
Frequency tolerant		(synchron:+/-%2) (free running:+/-%0,2)
Efficiency (100% load)		>85%		>90%
Harmonic Distortion		<=3% THD (Linear Load),<=5% THD(Non Linear Load)
Transfer Time	AC to DC	Zero
	Inverter to Bypass	4 ms (Typical)
Waveform (Batt. Mode)		Pure Sine Wave
Crest faktor		3:1
BATTERY
Battery Type & Numbers		Maintenance free lead-acid batteries / 12V x 32pcs
charge current		8A
Battery Start		Yes, UPS can be started without AC source.
Battery protection		Automatic circuit breaker
Battery voltage protection		Electronic 3 level alarms
OVERLOAD
Overload protection		(>130-%150 load :60 seconds ) (>%150 load :30 seconds)
Short circuit protection		Electronic protection
Output voltage protection		Electronic out of tolerant protection
PHYSICAL
Dimension, D X W X H (mm)		600*620*1200			600*720*1500
Net Weight (kgs)		200	265	315	342	405	560
OPERATING ENVIRONMENT
Humidity		0% - 90% (NonLCCondensing)
Temperature		0 – 40°C
Overtemperature protection		Electronic protection
Noise Level		< 58 dBA (At 1 M)		< 63 dBA (At 1 M)
Altitude		<1000 M Above Sea Level
LED,LCD,Buzzer		YES
MANAGEMENT
Remote Control		Dry contact, RS232
. All specifications mentioned above are subject to change without prior notice.

 

Summary: Highest reliability and maximum performance for power sharing and redundancy. Must UPS power systems have been explicitly designed to meet the demands of today's industrial processes and special projects where reliability, availability and serviceability are equally as important as product quality and technical competence.

on-line ups 20kva on-line pure sine wave ups isolate transformer ups 10kva to 80kva ups